With the Orthographic 2 Orthopedic
Table, procedures such as hip
pinning, tibia/fibula nailing and
intramedullary nailing of the femur are
accomplished with maximum
efficiency. Setting up for the
intramedullary nailing procedure is
easier, since only two accessories need
to be added to the table.
- Non Contact Tonometer with Full Auto 3-D Auto alignment and extremely soft air puff.
Advanced Full Auto technology for 3-D Auto alignment, auto tracking,
auto measurement and auto print-out! Extremely easy and comfortable operation and
reliable measurements. Extremely soft air puff for enhanced patient's comfort.
Specifications
- Measurable range: 0-30mm Hg, 0-60 mm Hg
- Measuring increment: 1 mm Hg
- Operation distance: Approx. 11 mm from front of nozzle
- Alignment: Auto/manual
- Observation range: Approx 15 mm x 12 mm
- Memory: Maximum of 10 measurements for each eye
- Printer: Thermal line printer
- Power supply: AC 100-240V, 50/60Hz, 0.4-0.8A
- Dimensions (W x L x H): Main unit: 280 mm x 520 mm x 495 mm (11.0 x 20.5 x 19.5 inch)
With industry-leading algorithms, the CASE system enables you to quickly and easily assess cardiac function during
exercise for greater diagnostic confidence. Connect your CASE system to a Local Area Network (LAN), and you can store
patient data and test results to a central database. This enables physicians to review, edit and print data remotely,
for maximum efficiency in your stress lab. CASE enables you to optimize your digital workflow, too, with seamless connectivity
to EMR, PACS, and the MUSE* Cardiology Information System. Whether you use a standalone system, a group of workstations or a complete
enterprise solution, we have the scalable solution that fits your needs today and tomorrow.
Specifications
ECG Analysis Frequency: 500 Hz
ST Measurements: ST amplitudes, slope, integral, index, ST/HR slope, ST/HR loops, ST/HR index up to 15 leads
E, J and Post-J Point: Manual or computer selected
Signal Processing: Incremental median updating technique
The General Electric RT-3200 Advantage Series are compact ultrasound systems that delivers
premium imaging ability for the OB/GYN, Fertility and Breast applications.With a large array of
transducers to choose from, the Advantage Series is perfect for start up practices.
Controls on the side rails for all positions
Both manual and electric controls as well as full chair position
Trendelenburg position to facilitate ease of care and add comfort
Removable Head and Footboard
All four wheels lock from a single pedal on both side of the bed
CPR Release
GCI Interface
Powered Foot section that lowers and extends
Equipped with bed exit alarm
Optional Patient Scale
w/Mattress
Specifications
- 500 Lbs. Patient Weight Capacity
- Integrated Patient Scale
- Nurse SideCom & Patient SideCom Controls With Lockout
Controls on the side rails for all positions
Both manual and electric controls as well as full chair position
Trendelenburg position to facilitate ease of care and add comfort
Removable Head and Footboard
All four wheels lock from a single pedal on both side of the bed
CPR Release
GCI Interface
Powered Foot section that lowers and extends
Equipped with bed exit alarm
Optional Patient Scale
w/Mattress
Specifications
- 500 Lbs. Patient Weight Capacity
- Integrated Patient Scale
- Nurse SideCom & Patient SideCom Controls With Lockout
The intuitive design of the Affinity III Birthing Bed has a simplified OneStep feature that allows a single caregiver
to perform tasks that previously required multiple steps. The Affinity Three Birthing Bed is one of the industry's most mobile
beds because of its easy to maneuver bed design, making it one of the safest beds for both patients and caregivers.
Specifications
- Total Length 90" (229 cm)
- Length from roller bumpers to break in seat section: 61 7/8" (157 cm)
- Length from break in the seat section end of bed: 28 1/8" (71 cm)
- Maximum Width (siderails stored) 36" (91 cm)
- Maximum Width (siderails up) 39" (99 cm)
- Maximum Headboard Height 52" (132 cm)
- Maximum Siderail Height (without mattress): 14¾" (37.47 cm)
The HUMPHREY HARK-599 is the Best combination refractor-keratometer
to offer subjective refinement of sphere, cylinder, and axis as well as isolated acuity lines, children's targets,
near testing, and low contrast sensitivity testing. The HUMPHRY HARK-599 allows for immediate patient feedback on the
prescription and can be linked to the Humphrey Lens Analyzer to allow patients to compare their current
RX to the new refraction results. Precise keratometry readings can be instantly obtained for all clinical needs.
Specifications
- Fast, accurate and objective measurements
- With complete printout
- Automatic cycle for objective measurements
- Complete automatic alignment and tracking
- Acuity line isolation
- Cylinder and axis refinement
- Duochrome target
- Jackson Cross Cylinder Test
- Near vision testing
- Glare testing
- Spherical equivalents
- PD displayed on printout
- Children's acuity targets
- Recall for old and new Rx comparisons
- Communicom Interface
- Keratometry Reading including average and delta K's
Many consider this the finest eye microscope ever made. The venerable 690 was the first unit
to offer all the modern upgrades in one package. The system is foolproof and problems are easily diagnosed.
The modular construction of the unit ensures a quick turn-around on downed components. This system won't let you down.
Leica 690 Microscope Features
The ConMed Linvatec Advantage System is a full-function, electric powered system that uses multiple electric handpieces
for a wide range of surgical applications including Arthroscopy, Large Bone Orthopedics, Small Bone Orthopedics, Orthopedic
Trauma, Oral and Maxillofacial Surgery, Otolaryngology, Neurosurgery, and Spine Surgery. Because it is a complete, standardized
and specialized all-in-one system, the Advantage System provides significant cost savings, simplified inventory management, and
ease of use. Each of the system handpieces has been designed to meet the specific needs of each individual surgical specialty in
which the handpiece is used. The complete Advantage System consists of 1 microprocessor-based console, more than 24 electric handpieces,
and 2 footpedals
Specifications
- Operates more than 24 different handpieces
- Can operate two handpieces simultaneously
- Easy to use
- Simplifies O.R. setup and inventory management
- Closed-loop software control provides constant power output under any load
- Provides built-in irrigation pump for use in irrigating surgical site
- Both hand or foot control of handpieces is available
- Designed for use in Arthroscopy, Large Bone Orthopedics, Small Bone Orthopedics, Oral/Maxillofacial Surgery, Orthopedic Trauma, Otolaryngology, Neurosurgery, and Spine
- Operating speeds and modes may be controlled from inside or outside the sterile field
The demand for heavy-load operating tables is growing all around the world. The ALPHAMAXX by Maquet
offers unparalleled safety and stability. Developed in collaboration with physicians and surgeons, ALPHAMAXX
offers maximum load capacity, maximum flexibility and maximum comfort. The modular structure allows adaptation
to the patient’s body size and can withstand extreme loads in every position. ALPHAMAXX can be quickly and easily
equipped for any surgical discipline. Advantages include maximum height adjustment, longitudinal shift, lateral tilt
and special positions as well as a load capacity of up to 450 kg / 990 lbs.
Specifications
- Height (without padding) 23.4 – 41.6 inches
- Trendelenburg +30°/-30°
- Lateral tilt 20°
- Lower back plate +80°/-40°
- Leg plates (adjustable individually or synchronously) +10°/-90°
- Longitudinal shift 1133.22
- Longitudinal shift 1133.12
- 18.1 inches
- 9 inches
- Flex/Reflex/Beach Chair
- O-position (horizontal position of operating table top)
Adaptable to your needs - If your staffing or your patient care requirements change, so can
the monitoring system, easily. Side-by-side display of current vital signs with thirty minutes of
trends for “at-a-glance” patient assessment.· Component modularity- Compact measurement modules.
Updatable processors Easily add and change the capabilities of your monitor. Low maintenance -
Engineered for reliability and ease of maintenance. Individual components are more cost-effective to repair and replace.
Built to be rugged, reliable, and easy-to-use, the Philips HeartStart MRx Monitor/Defibrillator with our advanced DXL 12-Lead ECG algorithm seamlessly provides:
industry-leading patient monitoring capabilities
superb diagnostic measurements
robust and reliable STEMI clinical decision support tools
evidence-based, proven resuscitation therapies
CPR guidance with the Q-CPRTM measurement and feedback tool
Our open systems approach to data management helps you streamline information so that it flows from your EMS agency to and throughout the hospital for enhanced patient care and operational efficiency.
The Ritter Midmark 111 Exam Chair offers Power capabilities. It will add style as well as
power to easily move your patients comfortably to the exact position you want. The Midmark Ritter 111
power exam table comes with an easy-to-use foot control pedal to adjust height, tilt, back, and foot sections.
The Midmark 411 Power Chair is a refurbished 4-way power chair designed for multi-practice
situations. This chair operates with a side panel control to control the back, tilt, foot
and height. The 411 is fully programmable with 8 program positions. This feature saves time
during patient exams to get the table into and out of common positions. Other useful features
includeprocto knee rest, paper storage, slide-out treatment pan, adjustable headrest and adjustable
stirrups, removable uphostery sections for effective and easy cleaning, optional foot control.
Perfect for plastic surgery, OB-Gyn, proctology, dermatology and general practice.
Specifications
- Patient Weight (Maximum): 325 lbs (147.4 kgs) maximum
- Weight of Table: 515 lbs (233.6 kgs)
- Back Section Range: 0° (horizontal) to +85° ± 5°
- Table Top Height Range: 22.5 ± 0.5 in. to 40.0 ± 1.0 in. (55.9 ± 1.3 cm to 101.6 ± 2.5 cm)
- Foot Section Range: 0° (horizontal) to -90° ± 5°
- Table Top Tilt Range: 0° (horizontal) to +30° ± 5° (foot up)
- Dimensions: Upholstered top: 27.0 in. wide x 69.25 in. long (68.6 cm x 175.9 cm)
- With Headrest Extended: 82.75 in. (210.2 cm)
- Electrical Requirements: 115 VAC nominal (126 VAC maximum - 110 VAC minimum), 60 HZ, 12 amps maximum
- Paper Rolls: Can accept two standard paper rolls of 18 in. x 3.0 in. (45.7 cm x 7.6 cm)
- Duty Cycle: 15 seconds on / 5 minutes off (motor run time)
- Power Cord: extends 70 in. (Minimum) from table. 12 AWG / 3 conductor, SJT grey jacketed junior hard service with hospital grade grounding type plug.
The Skytron 6001 Elite Surgical Table is a remote-controlled operating table that allows
for multi-positions of the patient and C-arm. Due to the power functions, this table is
suitable for a wide range of procedures. Features include a 30 degree lateral tilt, trendelenberg
and reverse trendelenberg, 180 degree top rotation, electro-hydraulic floor locks and a standard 500 lb
weight capacity. This table has been completely refurbished and painted and includes a 1-year warranty,
new pads and a new hand control. Call for further details on table or to receive more photos.
The Steris 3080 Surgical Table (Remote Control) provides complete flexibility for patient positioning, no matter how difficult the procedural or imaging requirements.
Its proven performance ensures increased productivity, ease of use and long term reliability.
The 3080 RC handles virtually all the surgical specialties you expect a general surgical table to handle, including urology and neurology, pediatrics, ENT and endovascular, and even orthopedics, including skeletal traction, with accessories.
The Steris 3080 Surgical Table is a mobile, electro hydraulically operated surgical table designed to support general surgical procedures.
All Steris 3080 Surgical Table articulations for patients up to 400 lb in weight, normally positioned, can be safely performed with the floor locks LOCKED.
Additional Amsco 3080 SP Surgical Accessories Packages further enhance posturing capabilities.
- Mobility, Simplicity, and Versatility. Fully equipped and completely adaptable, the M-Series
allows you to choose the mobility solution that best suits your needs. Supremely mobile and user-friendly,
these stretchers greatly reduce the physical strain on clinicians without sacrificing patient care and comfort.
The Stryker M-Series Stretcher model number SM304 features all standard features plus Zoom Motorized Drive System.
- The CA-200F is a placido-based topography system that delivers accurate, high resolution
images of the anterior corneal surface. 24 rings measure over 10,000 data points. The Topcon
CA-200F incorporates 8 Blue LED’s for fluorescein images which are essential for contact lens
simulation. The Topcon CA-200F Corneal Analyzer can be operated as a stand alone unit, or in
combination with an external PC. The combination of a 10-inch color touch screen and high speed CCD
camera with auto capture and best image feature makes acquisition, operation and evaluation of the cornea fast and easy.
Specifications
- Keratoscope cone 24 rings equally spaced on a 43D sphere
- Analyzed points Over 100,000
- Measured points Over 10,000
- Corneal coverage From 0.3 (minimal diameter on a sphere of 43D) up to 10.5mm on a normal eye
- Diopter power range From 1D to over 120D
- Resolution +/- 0.01D, 1 micron
- Accuracy/Precision Axial radius ±0.03mm altimetric data ± 2µm at 4mm
- The tri-functional KR-8000PA combines an auto refractor, auto keratometer, and a corneal
mapping system all in one instrument! It features Topcon''s rotary prism technology for
enhanced accuracy, 10 placido rings, and corneal measurements out to 10mm.
Specifications
- Objective Refractometer Mode
- Sphere -25 to +22D in 0.25D step (0.12D step available)
- Cylinder 0 to ±8D in step 0.25D (0.12D step available)
- The Topcon SL3D slit lamp is a fine instrument with superior illumination and optical quality, combined with a proven design provide a versatile slit lamp to meet the most exacting practitioners’ requirements.
The crisp slit image is completely rotatable from 0 to 180 degrees. The slit beam in the horizontal position may be inclined or tilted up to 20 while maintaining exact center of rotation distance and focus which is essential for gonioscopy.
Standard magnifications for this slit lamp are 10X, 16X, and 25X. Cobalt blue, red free, heat absorbing, and neutral density filters are incorporated. Hruby lens is pre-set and pre-centered to follow all movements of the microscope arm.
An illuminated target style fixation device allows for correction to match the patient’s refractive error.
- The CT-80 Computerized Tonometer makes intraocular pressure measurements easier and
more comfortable than ever before. It features a 30% faster measurement time, a triple
patient safety function, and a dual sensor measuring system.
Specifications
- Measuring range 0∼60mmHg
- Working distance 11mm
- Measurement display Monitor screen (with average value)
- Measurement recording Built-in printer (with average value)
- Alignment display Monitor screen
- Monitor screen 5in.
- Power saving Power save system
- External I/O terminal RS232C
- Power supply AC 100, 120, 220, 230 and 240V; 50/60Hz
- This system provides three times the diagnostics in one third the space at a fraction
of the cost of individual instruments. Alleviates the burden of standard corneal topography
units from the doctor or the highest trained technician and allows newly-trained technicians
to obtain equal results. The unit offers excellent comprehensive guidelines to ensure
accurate and reliable results.
- With the simplicity of one touch design all your sterilization and drying needs are
fulfilled. The Tuttnauer EZ10 fully automatic autoclave will fill, sterilize, exhaust
and dry at the touch of a button.
Specifications
- Closed door active drying system to maintain sterility and ensure efficient drying of packs and pouches.
- High efficiency air pump circulates hot air after the sterilization cycle for fast drying.
- Hepa filter 0.2 µm air filter (replaceable).
- All program parameters can be customized and stored.
- Automatic shut off at the end of both the sterilization and dry cycles.
- Audible and visual cycle interruption alert.
- Double safety locking device prevents door from opening while chamber is pressurized.
- Low water sensor prevents activation of sterilization cycle when there is insufficient water in the chamber or reservoir.
- Constant monitoring of temperature and pressure for sterilization.
- Power outage recovery system.
- Door design prevents steam from coming in contact with control panel.
- Optional internal printer documents: date, time, temperature and pressure.
- 510k clearance for dental handpieces.
- Drain valve is located on the front, allowing for quick and easy draining of water reservoir.
Instant ResponseTM Technology
Instant Response technology provides surgeons with improved performance or lower power settings,
minimizing the risk of tissue damage and neuromuscular stimulation, and decreasing the need to “turn up the generator.” A Smoother Cut Through All Tissue Types
The Force EZ generator adjusts automatically, responding to tissue changes, maintaining power delivery, and minimizing drag. Added Safety and Reliability Minimizes Electrosurgical Risks
Capacitive coupling is reduced by 30-50% when using Instant Response technology. This reduction is achieved by limting the RMS
voltage and the high frequency harmonics. Lower voltage means less neuromuscular stimulation and more precise delivery of energy
to reduce collateral damage.
Specifications
- Instant Response technology ensures that the power delivered remains virtually constant, regardless of the tissue type
- Improved performance at lower power settings minimizes the risk of tissue damage and neuromuscular stimulation
- Three internal microcontrollers reduce system reaction time and increase the system’s processing speed
- Easy to use, cost effective system when performance is required and price is of equal concern
- A Power Efficiency Rating (PER) of approximately 97 for accurate and consistent cut performance
- Two cut modes, both controlled by Instant Response technology, offer surgeons a variety of choices
- Pure Cut for a clean, precise cut
- Blend for cutting with hemostatsis
- Two primary coag modes
- Low for lower voltage contact coagulation suitable in laparoscopic and delicate tissue work
- High for efficient noncontact coagulation in most applications
- Standard bipolar mode
- Standard mode is controlled by Instant Response technology and utilizes low voltage to prevent sparking
- Versatile system that is uniquely compatible with other devices, including:
- Force Argon IITM and Force GSU argon coagulation system
- OptiMummTM smoke evacuator, through a direct cable link
- Separate monopolar and bipolar footswitch connectors on rear panel for easy set up
- Convenient design for boom applications
- Additional front mounted footswitch connector is switchable, allowing monopolar or bipolar activation from a monopolar footswitch
- Welch Allyn 48300 exam light with Fiber-Optic Light pipe bends to any position. Provides
homogeneous spot and variable size. Ideal for gynecological exams and minor procedures. Can
be mounted on wall, mobile stand or exam table.
Fiber-Optic Light pipe is a durable fiber optic light pipe which provides cool illumination
and is bendable to almost any position
Specifications
- One light output; pinpoint accuracy; true tissue color rendition
- Highly flexible pipe for easy maneuverability
- Lightweight pipe is twice as long as conventional pipes
- Easily positioned small head leaves clear view of task areas
- Sealed focusing sleeve keeps optics free of dust
- Provides homogeneous spot and variable size
- Ideal for gynecological examinations and minor procedures
- Multiple mounting options for floor space maximization
