1-818-899-8090
info@medicalrv.com
13715 Desmond St. Pacoima, CA 91331
Toggle navigation
Home
About Us
Products
Anesthesia Units
Blankets / Solution Warmers
Defibrillators
Doctor Stools
Examination Lights
Exam/Procedure Tables
Gurneys
Hospital Beds
Monitors
Medical Cart
Ophthalmology
Pumps
Sterilizers
Surgical Accessories
Surgical Lights
Surgical Tables
Tables
Ultrasounds
Wheelchairs
Services
Company
Sell Your Equipment
Recycle
Rental
Store
Contact Us
Hospital Beds
Hill Rom Total Care ICU Bed
Features
- Continuous Lateral Rotation Therapy
- Percussion and Vibration Therapy, including postural option
- Weight based pressure redistribution in any bed position
- Advanced Microclimate Management technology
- Point-Of-Care® siderail controls with Graphical Caregiver Interface feature (GCI®)
- Digital Head of bed angle indicator and alarm
- 3 mode bed exit sensor with alarm silence and alarm suspend modes
- FullChair® and chair egress with stand assist
- One-button Boost® patient repositioning support
- Turn assist
- Optional IntelliDrive® powered transport
- History data on patient weight, head of bed elevation, chair position, and pulmonary therapies
Specifications
- Overall Length: FlexAfoot Extended 93", FlexAfoot Retracted 81.5"
- Overall Width: Siderails Stowed 38", Rails Up 40"
- Max Head Elevation: 75°
- Maximum Weight Capacity: 500lbs
Refurbishment Process
- Disassemble Bed
- Steam clean frame and components
- Paint frame
- Install new brake mechanisms on both sides
- Sand and repaint shrouds with our special 2 part polyurethane coating
- Rebuild pumps with new seals and adjust pumps speed and travel
- New stickers per customers choice of color
- Clean,adjust and lube brake/steer components
- New bumpers and plastic
- 1 year warranty
Hill Rom Advance 1105
Features
- Auto Contour Complete Therapeutic Positioning
- Chair Position
- Central Brake and Steering Dynamic Air Sleep Surface
- Patient and Staff Controls on Head Rails
- Automatic Night Light
Specifications
- Caster: 5"
- Overall Dimensions: 41.50"W 93.50"L
- Sleep Dimensions: 36" x 84"
- Maximum Weight Capacity: 500lbs.
- Height Range: 17" to 30"
- Hi-Low Travel Time: 21sec.
Refurbishment Process
- Disassemble Bed
- Steam clean frame and components
- Paint frame
- Install new brake mechanisms on both sides
- Sand and repaint shrouds with our special 2 part polyurethane coating
- Rebuild pumps with new seals and adjust pumps speed and travel
- New stickers per customers choice of color
- Clean,adjust and lube brake/steer components
- New bumpers and plastic
- 1 year warranty
Hill Rom Versa Care
Features
- Boost one-button feature helps patients move toward the head of the bed
- IntelliDrive powered transport lets staff handle the bed effortlessly
- Point of Care control panel uses easy to read digital display and simple icons
- Fully featured low bed can be adjusted to the optimal height for patient care with full functionality in the lowest position
- Hands free foot pedal system allows caregivers to raise or lower the head of the bed and height of the bed without using their hands
- Low chair position allows patients to be placed in an upright position while keeping the bed low
-
Specifications
- Bed Height: High Position 34", Low Position 17"
- Overall Width: 40" (Siderails Down: 37")
- Overall Length: Fully Extended 94.50", Fully Retracted 82.50"
- Max Head Elevation: 0° to 65°
- Max Foot Section: 0° to 27°
- Max Patient Weight Limit: 500lbs
Refurbishment Process
- Disassemble Bed
- Steam clean frame and components
- Paint frame
- Install new brake mechanisms on both sides
- Sand and repaint shrouds with our special 2 part polyurethane coating
- Rebuild pumps with new seals and adjust pumps speed and travel
- New stickers per customers choice of color
- Clean,adjust and lube brake/steer components
- New bumpers and plastic
- 1 year warranty
Hill Rom Sport
Features
- Fully Function Test
- Basic Bed Function: Head, Knee, Hi-Low
- Spring sleep surface (Standard) or Orthopedic/Hard pan surface (Upgrade)
- New PC Boards (5 Year Warranty)
- New motor couplings and capacitors
- Rebuilt caster with new components and wheels
- Delivery/Installation available upon request (Domestic Only)
Specifications
- Total Length: 92.50"
- 5" Caster
- Bed Lift Capacity: 500lbs
- Trendelenburg/Reverse Trend
- Central Brake and Steer
- Sleep Surface: 35" x 83"
- Height Range: 14.50" to 33.50"
- Full Chair Position
Optional
- Side Guard Communications
- Percussion and Vibration Module
- Rotation Module
- Two-Layer Therapeutic Surface
Refurbishment Process
- Disassemble Bed
- Steam clean frame and components
- Paint frame
- Install new brake mechanisms on both sides
- Sand and repaint shrouds with our special 2 part polyurethane coating
- Rebuild pumps with new seals and adjust pumps speed and travel
- New stickers per customers choice of color
- Clean,adjust and lube brake/steer components
- New bumpers and plastic
- 1 year warranty
Stryker Secure II 3002
Features
- Open architecture allows the flexibility to choose any sleep surface
- Retractable bed frame helps keep patients close to their belongings regardless of bed articulation
- 6" (15 cm) casters
- Dual pedestal design
- CPR release
- In-rail fowler/kneed gatch control
- Electronic function lock-out control
- Four-wheel, steel-ring brake system with centrally-located activation pedals
- Backrest angle indicator
- Locking-caster steering
- Four traction sockets
- Removable headboard with CPR capability
- Retractable litter top
- Four foley bag hooks
- Four IV receptacles
- Patient restraint locations
- Trend reverse and Trend controls
Specifications
- Overall Length: 93" (236 cm)
- Overall Width: Siderails Up: 42.5" (108 cm), Siderails Down: 40" (102 cm)
- Weight Capacity: 500 lbs
- Backrest: 0° to 60°
- Knee Gatch: 0° to 40°
- Trend. / Reverse Trend. +/- 12 degrees (+/-10 degrees with ZX option)
- Retraction: 14"
- Patient Surface: 35" x 84"
- 6" Caster
Refurbishment Process
- Disassemble Bed
- Steam clean frame and components
- Paint frame
- Install new brake mechanisms on both sides
- Sand and repaint shrouds with our special 2 part polyurethane coating
- Rebuild pumps with new seals and adjust pumps speed and travel
- New stickers per customers choice of color
- Clean,adjust and lube brake/steer components
- New bumpers and plastic
- 1 year warranty
Stryker FL28ex GO Bed II
Features
- BackSmart Design
- Chaperone Bed Exit System
- Integrated Scale
- Open Architecture
- Exceptional Low Height
- Complete Siderail Controls
- Retractable Fifth Wheel
- Intuitive Siderail Control
- Integrated Pump Holder
- Cardiac Chair Positioning
- Manual Back-up
Specifications
- Overall Length: 94.25"
- Overall Width: 40", with Siderails Down 39"
- Weight Capacity: 500lbs.
- Height: High 29", Low 14.50"
- Backrest Positioning: 0° to 60°
- Knee Gatch: 0° to 28°
- Patient Surface: 36" x 84"
- 6" Caster
Refurbishment Process
- Disassemble Bed
- Steam clean frame and components
- Paint frame
- Install new brake mechanisms on both sides
- Sand and repaint shrouds with our special 2 part polyurethane coating
- Rebuild pumps with new seals and adjust pumps speed and travel
- New stickers per customers choice of color
- Clean,adjust and lube brake/steer components
- New bumpers and plastic
- 1 year warranty
Stryker Epic II 2030
Features
- Siderail and footboard positioning controls
- Cardiac chair/ Emergency drop
- Backrest Trend/ angle display
- Radiolucent from neck through pelvic region
- Scale-isolated drainage bag hooks/head end IV poles
- Integrated 8" bed extender
- Four-wheel, steel ring brake system with centrally located activation pedals
- 90 degree backrest for upright chest imaging
- Dual pedestal design
- CPR release for backrest and knee
- Locking caster steering
- Four traction sockets
- Four IV receptacles (scale isolated at head end)
- Electric function lock-out controls
- In-rail backrest/knee catch controls
- Removable CPR board
Specifications
- Overall length- 91"
- Overall width- side rails up: 42.5"
- Overall width- side rails down: 40"
- Height-low (to litter top) 18"
- Height-high (to litter top) 32.5"
- Knee/Gatch angle: 0 degree to 30 degree
- Back/Fowler angle: 0 degree to 90 degree
- Trend- 12 degree
- Reverse Trend- +12 degree
- Patient surface: 35" x 84"
- Patient weight: 500 lbs
Refurbishment Process
- Completely disassemble bed
- Steam clean frame and components
- Paint frame
- Install new brake mechanisms on both sides
- Sand and repaint shrouds with our special 2 part polyurethane coating
- Rebuild pumps with new seals and adjust pumps speed and travel
- New stickers per customers choice of color
- New pad
- Rebuild pumps with new seals and adjust pumps speed and travel
- 1 year warranty
Stryker Intouch 2140
Features
- Zoom drive
- Scale
- Bed exit
- IBED
- Bed controls
- options screen
- CPR foot peddle
- Battery back-up
- Touch screen controls
Specifications
- 550 lb weight capacity
Refurbishment Process
- Disassemble Bed
- Steam clean frame and components
- Paint frame
- Install new brake mechanisms on both sides
- Sand and repaint shrouds with our special 2 part polyurethane coating
- Rebuild pumps with new seals and adjust pumps speed and travel
- New stickers per customers choice of color
- Clean,adjust and lube brake/steer components
- New bumpers and plastic
- 1 year warranty
KCI Barimaxx
Features
- The BariMaxx™ Active Therapy System includes the AtmosAir™ 9000E mattress with Self-Adjusting Technology™ (SAT™).
- The AtmosAir™ 9000E with SAT™ supports and distributes patient weight automatically to relieve pressure and enhance comfort.
Specifications
- Length: 203 cm (224 cm with optional foot extension)
- Width: 90 cm (123 cm with optional side extensions)
- Height: 19 cm
- Weight: 20 kg
- Maximum patient weight: 455 kg
- Cover: Dartex two-way stretch, breathable medical fabric to reduce shear and friction
- Bed Frame -> Weight: 425 kg
- Bed Frame -> Height to mattress support surface (Min/Max): 44/66 cm
- Bed Frame -> Overall Length (retracted): 240 cm
- Bed Frame -> Overall Length (expanded): 255 cm
- Bed Frame -> Overall Width (side rails retracted): 109 cm
- Bed Frame -> Overall Width (side rails expanded): 142 cm
- Bed Frame -> Safe working load: 455 kg
- Foot of bed and hand pendant controls
- NElectrical
- Voltage: 230 V
- Frequency: 50/60 Hz
- Amps: 10 A
Refurbishment Process
- Disassemble Bed
- Steam clean frame and components
- Paint frame
- Install new brake mechanisms on both sides
- Sand and repaint shrouds with our special 2 part polyurethane coating
- Rebuild pumps with new seals and adjust pumps speed and travel
- New stickers per customers choice of color
- Clean,adjust and lube brake/steer components
- New bumpers and plastic
- 1 year warranty
1
2